|
|
TM 9-2320-366-20-3
4-5. CHARGE AIR COOLER TO AIR INLET ELBOW TUBES AND HOSES
REPLACEMENT (CONT)
NOTE
Perform steps (2) through (5) on vehicle
serial numbers 3091 and higher, and vehicle
serial numbers 0001 through 3091 that have
previously had a valve cover or lower charge
air tube bracket replaced.
(2) Position lower charge air tube bracket (4) on air inlet
elbow (5) with washer (6) and screw (7).
(3) Position clamp (8), washer (9), and screw (10) in lower
charge air tube bracket (4).
(4) Position washer (11) and screw (12) in lower charge air
tube bracket (4).
(5) Tighten screw (7), screw (10), and screw (12) to 15-25
lb-ft (20-34 Nm).
NOTE
Perform steps (6) through (8) on vehicle
serial numbers 0001 through 3091 that have
not previously had a valve cover or lower
charge air tube bracket replaced.
(6) Position lower charge air tube bracket (13) on duct
manifold (14) with washer (15) and screw (16).
(7) Position washer (17) and screw (18) in lower charge air
tube bracket (13).
(8) Tighten screws (16 and 18) to 15-25 lb-ft (20-34 Nm).
4-34
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |