CHARGE AIR COOLER TO AIR INLET ELBOW TUBES AND HOSES REPLACEMENT

TM 9-2320-366-20-3

4-5. CHARGE AIR COOLER TO AIR INLET ELBOW TUBES AND HOSES

REPLACEMENT

This task covers:

a. Removal

c. Follow-On Maintenance

b. Installation

INITIAL SETUP

Equipment Conditions

Tools and Special Tools (Cont)

Engine shut down (TM 9-2320-366-10-1).

Socket Set, Socket Wrench (Item 36, Appendix C)

Cab raised (TM 9-2320-366-10-1).

Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)

Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Materials/Parts

Screwdriver Attachment, Socket Wrench (Item

Nut, Self-Locking (2) (Item 154, Appendix G)

a. Removal.

(1) Remove two self-locking nuts (1), screws (2), and upper

charge air tube bracket (3) from lower charge air tube

bracket (4). Discard self-locking nuts.

NOTE

Inner and outer charge air cooler to air inlet

elbow tubes are removed the same way.

Outer charge air cooler to air inlet elbow tube

shown.

(2) Loosen clamp (5) on hose (6).

(3) Disconnect hose (6) from air inlet elbow (7).