ENGINE OIL FILL TUBE REPLACEMENT

TM 9-2320-366-20-3

3-7. ENGINE OIL FILL TUBE REPLACEMENT

This task covers:

a. Removal

c. Follow-On Maintenance

b. Installation

INITIAL SETUP

Equipment Conditions

Tools and Special Tools (Cont)

Engine shut down (TM 9-2320-366-10-1).

Wrench, Torque, 0-200 lb-in. (Item 59, Appendix

Cab raised (TM 9-2320-366-10-1).

Transmission oil fill tube removed (Para 8-22).

Socket Set, Socket Wrench (Item 36, Appendix

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Materials/Parts

Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)

Nut, Self-Locking (2) (all models except

Screwdriver Attachment, Socket Wrench (Item 61,

M1093/M1094) (Item 167, Appendix G)

Nut, Self-Locking (M1093/M1094) (Item 167,

a. Removal.

(1) Remove cap (1) from engine oil fill tube (2).

NOTE

Perform steps (2) and (3) on all models

except M1093/M1094.

(2) Remove self-locking nut (3), washer (4), engine oil fill

tube (2), screw (5), and washer (6) from radiator

overflow tank bracket (7). Discard self-locking nut.

(3) Remove self-locking nut (8), washer (9), engine oil fill

tube (2), screw (10), and washer (11) from front lifting

beam (12). Discard self-locking nut.