ENGINE AND TRANSMISSION OIL SAMPLING VALVES REPLACEMENT

TM 9-2320-366-20-3

3-6. ENGINE AND TRANSMISSION OIL SAMPLING VALVES REPLACEMENT

This task covers:

a. Removal

c. Follow-On Maintenance

b. Installation

INITIAL SETUP

Equipment Conditions

Materials/Parts

Engine shut down (TM 9-2320-366-10-1).

Dispenser, Pressure Sensitive Adhesive Tape

Cab raised (TM 9-2320-366-10-1).

Packing, Preformed (Item 186, Appendix G)

Antiseize Compound (Item 58, Appendix D)

Tools and Special Tools

Goggles, Industrial (Item 15, Appendix C)

Pan, Drain (Item 24, Appendix C)

Tool Kit, Genl Mech (Item 46, Appendix C)

Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)

Wrench Set, Socket (Item 51, Appendix C)

WARNING

Wear appropriate eye protection when

working under vehicle due to the

possibility of falling debris. Failure to

comply may result in injury to personnel.

a. Removal.

(1) Position drain pan under transmission oil sampling valve

(1) and engine oil sampling valve (2).

NOTE

Tag hoses and connection points prior to

disconnecting.

(2) Disconnect transmission oil sampling hose (3) from

transmission oil sampling valve (1).

(3) Disconnect engine oil sampling hose (4) from engine oil

sampling valve (2).

(4) Remove nut (5) and transmission oil sampling valve (1)

from bracket (6).

(5) Remove nut (7) and engine oil sampling valve (2) from

bracket (6).

Change 1

3-15