Installation. - TM-9-2320-366-20-30514

TM 9-2320-366-20-3

3-3. VALVE COVER AND GASKET REPLACEMENT (CONT)

b. Installation.

WARNING

Adhesives, solvents, and sealing com-

pounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing. Keep away from open fire

and use in a well-ventilated area. If

adhesive, solvent, or sealing compound

gets on skin or clothing, wash

immediately with soap and water. Failure

to comply may result in injury to

personnel.

(1) Install engine data plate (1) on valve cover (2) with

adhesive.

(2) Apply sealing compound between screw holes of valve

cover (2).

(3) Position valve cover gasket (3) on valve cover (2).

NOTE

Vehicle serial numbers 0001 through 3091

were originally equipped with valve cover part

number 7W5627. Vehicle serial num-bers

3092 and higher serial numbers were

originally equipped with valve cover part

number 119-2960. If replacing valve cover

part number 7W5627 with valve cover part

number 119-2960, it will be necessary to use

the longer screws.

(4) Position valve cover (2) on inlet manifold (4) with 13

washers (5) and screws (6).

3-8