Section II. MAINTENANCE PROCEDURES - TM-9-2320-366-20-30508

TM 9-2320-366-20-3

Section II. MAINTENANCE PROCEDURES

3-2. LIFTING PLATE REPLACEMENT

This task covers:

a. Removal

c. Follow-On Maintenance

b. Installation

INITIAL SETUP

Equipment Conditions

Tools and Special Tools

Engine shut down (TM 9-2320-366-10-1).

Tool Kit, Genl Mech (Item 46, Appendix C)

Cab raised (TM 9-2320-366-10-1).

Goggles, Industrial (Item 15, Appendix C)

Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)

Container (40 qt (38 L) capacity)

WARNING

Coolant may be very hot and under pressure

from engine operation. Ensure engine is

cool before performing maintenance. Failure

to comply may result in injury to personnel.

Wear appropriate eye protection when

working under vehicle due to the possibility

of falling debris. Failure to comply may

result in injury to personnel.

a. Removal.

(1) Remove radiator cap (1) from radiator overflow tank (2).

(2) Position container under radiator draincock (3).

(3) Open radiator draincock (3) and drain approximately five

gallons (19 L) of coolant.

(4) Close radiator draincock (3).

3-2