STORAGE MAINTENANCE PROCEDURES

TM 9-2320-366-20-3

2-50. STORAGE MAINTENANCE PROCEDURES

Provide access to the vehicle during storage.

CAUTION

Ensure tires are not resting on surfaces containing grease or oil. Failure to comply may

result in damage to equipment.

Do not block wheels, but do be sure tires are not resting on surfaces containing grease or oil.

Perform complete lubrication in accordance with TM 9-2320-366-10-1 and Appendix H.

If possible, store vehicles close together, out of direct sunlight and away from electrical or generating equipment.

e. Ensure the fuel tank contains at least 20 gallons (75.7 liters) of treated fuel. The fuel should be treated with Biobor

J.F. The addition of 3 teaspoons of Biobor to 20 gallons of fuel will provide adequate protection against fungus growth.

When storing a vehicle in freezing conditions, the addition of 3 ounces of isopropyl alcohol to every 20 gallons of diesel

fuel will help prevent fuel-line freeze up.

Monthly Storage Maintenance Instructions.

(1)

Conduct visual inspection of vehicle. Check lubricant, battery electrolyte, coolant level, and tire pressures.

Correct any discrepancies.

(2)

Inspect oil can points. Lubricate if necessary.

(3)

Start engine and idle for 10 minutes. After 10 minutes of engine idle, operate engine for 5 minutes at 1500

rpm or until engine water temperature reaches 180 degrees F. Shift transmission slowly through all gear

selector positions. Return transmission to neutral.

(4)

Move vehicle 30 feet forward and reverse.

(5)

Idle engine 10 minutes before shutdown.

(6)

Check grease coating on all chromium plated and unpainted surfaces. If grease was wiped from chromium

plates or unpainted surfaces when vehicle was moved, recoat these surfaces.

Quarterly Storage Maintenance Instructions.

(1)

Move vehicle at least 1/4 mile. While driving, shift transmission through all gear ranges.

(2)

Exercise all auxiliary equipment and winch. While operating winch or crane, lubricate hoist and cables.

Yearly Storage Maintenance Instructions.

(1)

Clean exterior, engine, and undercarriage. Clean interior of cab. Wash any oil or grease from tires.

(2)

Visually inspect vehicle. Check lubricant levels and tire pressures. Correct all discrepancies.

(3)

Lubricate chassis, auxiliary equipment, winch, hoist cable, and oil can points.

2-2449/(2-2450 Blank)