AIR PRESSURE TEST STE/ICE-R TEST #50 - TM-9-2320-366-20-30465

TM 9-2320-366-20-3

WARNING

Wear protective goggles to protect against

possible injury from release of high pressure

air. Failure to comply may result in injury to

personnel.

NOTE

Tag air hose and connection point prior to

disconnecting

AIR PRESSURE TEST STE/ICE-R TEST #50

(1) Open LH and RH catwalks.

(2) Disconnect input air hose from input tee

fitting on pressure regulator.

(3) Connect input air hose to M1089 30K

winch pneumatic test adapter.

(4) Install STE/ICE-R 0-1000 PSI transducer on

M1089 30K winch pneumatic test adapter.

(5) Start engine (TM 9-2320-366-10-1).

(6) Perform STE/ICE-R Test #50 and note

reading on STE/ICE-R.

(7) If 75-120 PSI (518-827 kPa) is not present,

go to step 5 of this fault.

(8) Shut down engine (TM 9-2320-366-10-1).

(9) Drain air tanks (TM 9-2320-366-10-1).

(10) Disconnect input air hose from M1089 30K

winch pneumatic test adapter.

Change 1

2-2428.1