 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-366-20-3
WARNING
Drop hydraulic pressure to zero before
disconnecting any hydraulic hoses. Failure
to comply may result in injury to
personnel.
Hydraulic fluid (MIL-H-5606) is TOXIC.
Wear protective goggles and gloves; use
only in well ventilated area; avoid contact
with skin, eyes, and clothes. Skin and
clothing that come into contact with
hydraulic fluid should be washed
immediately. Saturated clothing should be
removed immediately. Failure to comply
may result in injury to personnel.
PRESSURE TEST
(1) Position drain pan under cab hydraulic
cylinder.
(2) Disconnect CAB LOWER pressure hose
from cab hydraulic cylinder output port.
(3) Connect STE/ICE-R to CAB LOWER pressure
hose.
(4) Start engine and charge air tanks
(TM 9-2320-366-10-1).
(5) Position CAB TILT knob to LOWER.
(6) Position FUNCTION SELECT knob
to CAB TILT.
(7) Push and hold PUMP plunger button
and perform STE-ICE-R Test #51
(TM 9-4910-571-12&P).
(8) If pressure is not 2,500-4,000 psi (17,237-
27,580 kPa), repair hydraulic manifold
CAB TILT valve (para 19-4).
(9) If pressure is 2,500-4,000 psi (17,237-
27,580 kPa), replace cab hydraulic
cylinder (para 19-11).
(10) Drain air tanks (TM 9-2320-366-10-1).
(11) Disconnect STE/ICE-R from pressure
hose.
(12) Connect pressure hose to cab hydraulic
cylinder output port.
Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals