 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-366-20-3
PRESSURE TEST
(1) Position drain pan under RH suspension
cylinder.
(2) Disconnect hydraulic hose 509 from RH
suspension cylinder output port.
(3) Connect STE/ICE-R between hydraulic
hose 509 and RH suspension cylinder
output port.
(4) Start engine (TM 9-2320-366-10-1).
(5) Position SUSPENSION knob to RAISE
(TM 9-2320-366-10-1).
(6) Position FUNCTION SELECT knob to
SUSPENSION (TM 9-2320-366-10-1).
(7) Push and hold PUMP plunger button
(TM 9-2320-366-10-1) and perform
STE/ICE-R Test #51.
(8) Shut down engine (TM 9-2320-366-10-1).
(9) Disconnect STE/ICE-R from RH suspension
cylinder output port and hydraulic hose
509.
(10) Connect hydraulic hose 509 to RH
suspension cylinder output port.
(11) Repeat steps (1) through (10) on LH
suspension cylinder and hydraulic hose
511.
(12) If 2,500-4,000 psi (17,238-27,580 kPa)
is not present, replace suspension
cylinder(s) (para 19-10).
(13) If 2,500-4,000 psi (17,238-27,580 kPa) is
present, replace hydraulic hose(s) 509
and/or 511.
Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals