CONTINUITY TEST - TM-9-2320-366-20-30149

TM 9-2320-366-20-3

CONTINUITY TEST

(1)

Set multimeter to ohms.

(2)

Connect positive (+) probe of multimeter to

connector PX7-9.

(3)

Connect negative (-) probe of multimeter to

connector J111D and note reading on multimeter.

(4)

If continuity is not present, repair wire 1528

(para 2-45) or replace WTEC II dashboard

cable assembly (para 7-10) or WTEC III

dashboard cable assembly (para 7-11).

(5)

Connect lighted indicator display to connector

PX7.

(6)

Position lighted indicator display in instrument

panel assembly with four screws.

(7)

Tighten four screws to 6-10 lb-in. (1 Nm).

2-2139