 |
|||
|
|
|||
|
Page Title:
Table 2-49.10. Inversion Valve Control Port Fitting Hose Numbers |
|
||
| ||||||||||
|
|
 TM 9-2320-366-20-2
(1) Loosen air hose (refer to Table 2-49.10.
Inversion Valve Control Port Fitting Hose
Numbers) at inversion valve control port
90-degree fitting supply port.
(2) Start engine (TM 9-2320-366-10-1).
(3) Apply service brakes (TM 9-2320-366-10-1).
(4) Check for presence of air at air hose
(refer to Table 2-49.10. Inversion Valve
Control Port Fitting Hose Numbers).
(5) Shut down engine (TM 9-2320-366-10-1).
(6) If air is not present, replace air hose
(refer to Table 2-49.10. Inversion Valve
Control Port Fitting Hose Numbers)
(para 11-21).
(7) If air is present, replace inversion valve
control port 90-degree fitting (para 11-13).
(8) Tighten air hose (refer to Table 2-49.10.
Inversion Valve Control Port Fitting Hose
Numbers) at inversion valve control port
90-degree fitting supply port.
Control Port Fitting Hose Numbers
Model
Hose
All Except M1086 and M1089
130
M1086
132
M1089
128
Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals