VOLTAGE TEST - TM-9-2320-366-20-20547

TM 9-2320-366-20-2

WARNING

Remove rings, bracelets, watches, necklaces,

and any other jewelry before working around

vehicle. Jewelry can catch on equipment and

cause injury or short across electrical circuit

and cause severe burns or electrical shock.

VOLTAGE TEST

(1)

Disconnect connector P107 from connector

J4.

(2)

Set multimeter to volts dc.

(3)

Connect positive (+) probe of multimeter to

connector P107g.

(4)

Connect negative (-) probe of multimeter to

ground.

(5)

Position master power switch to on

(TM 9-2320-366-10-1) and note reading on

multimeter.

(6)

If 24 vdc is not present, go to step 4 of this

fault.

(7)

Position master power switch to off

(TM 9-2320-366-10-1).

(8)

Connect connector P107 to connector J4.

2-1423