CONTINUITY TEST - TM-9-2320-366-20-20115

TM 9-2320-366-20-2

CONTINUITY TEST

(1)

Set multimeter to ohms.

(2)

Connect positive (+) probe of multimeter to

winch out solenoid L5 terminal 2.

(3)

Connect negative (-) probe of multimeter to

ground and note reading on multimeter.

(4)

If continuity is not present, repair wire 3070

(para 2-45) or replace winch control valve

cable assembly (para 7-135).

(5)

If continuity is present, replace winch control

valve assembly (para 17-25).

(6)

Connect winch out solenoid L5 connector on

solenoid L5 and tighten screw.

2-1001