 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-366-20-1
CONTINUITY TEST
(1) Set multimeter to ohms.
(2) Connect positive (+) probe of multimeter
to LED socket.
(3) Connect negative (-) probe of multimeter
to ground and note reading on multimeter.
(4) If continuity is not present, repair wire 3094
from terminal lug TL18 to terminal lug TL93
(LH rear blackout marker light) or wire 3095
from terminal lug TL21 to terminal lug TL92
(RH rear blackout marker light) (para 2-45)
or replace rear lights cable assembly
(para 7-84 or 7-104).
CONTINUITY TEST
(1) Set multimeter to ohms.
(2) Connect positive (+) probe of multimeter
to inside of housing.
(3) Connect negative (-) probe of multimeter
to LED socket and note reading on
multimeter.
(4) If continuity is not present, replace
composite taillight assembly (para 7-39).
(5) If continuity is present, replace rear
blackout marker light LED (para 7-39).
(6) Open blackout marker lamp.
(7) Install blackout marker lamp in socket.
(8) Install preformed packing and cover on
housing with six screws.
Change 1
2-641/(2-642 Blank)
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals