 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-366-20-1
OPERATIONAL TEST
(1) Start engine (TM 9-2320-366-10-1).
(2) Position main light switch to SER DRIVE
(TM 9-2320-366-10-1).
(3) Select R (reverse) on pushbutton shift
selector (TM 9-2320-366-10-1).
(4) If backup light does not illuminate, go to
step 23 of this fault.
(5) If backup light does illuminate, repair wire
3094 (refer to Table 2-12.19. Backup Light
Terminal Lugs) (para 2-45) or replace
M1083/M1084/M1085/M1090/M1092/
M1093/M1094/M1096 rear lights cable
assembly (para 7-84) or M1086/M1088/
M1089 rear lights cable assembly
(para 7-104).
(6) Select N (neutral) on pushbutton shift
selector (TM 9-2320-366-10-1).
(7) Position main light switch to OFF
(TM 9-2320-366-10-1).
(8) Shut down engine (TM 9-2320-366-10-1).
Model
Wire Segment
M1083/M1084/M1085/M1086/
Wire 3094 from Terminal Lug TL18 to Splice E21
M1090/M1092/M1093/M1094/
M1096
M1088
Wire 3094 from Terminal Lug TL18 to Splice E28
M1089
Wire 3094 from Terminal Lug TL18 to Terminal Lug TL17
Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals