 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-366-20-1
CAUTION
Use care when testing electrical connectors.
Do not damage connector pins or sockets
with multimeter probes. Failure to comply
may result in damage to equipment.
NOTE
Inspect connector pins/sockets for damage,
corrosion, and serviceability. Check that
connector pins are not pushed back and
are capable of making good contact.
CONTINUITY TEST
(1) Set multimeter to ohms.
(2) Connect positive (+) probe of multimeter to
connector J921socket A.
(3) Connect negative (-) probe of multimeter to
terminal lug TL164 and note reading on
multimeter.
(4) If continuity is not present, repair wire 32 in
troop transport alarm switch cable
assembly (para 2-45) or replace troop
transport alarm switch cable assembly
(para 20-70).
CONTINUITY TEST
(1) Set multimeter to ohms.
(2) Connect positive (+) probe of multimeter to
connector J921 socket C.
(3) Connect negative (-) probe of multimeter to
terminal lug TL165 and note reading on
multimeter.
(4) If continuity is not present, repair wire 3028
in troop transport alarm switch cable
assembly (para 2-45) or replace troop
transport alarm switch cable assembly
(para 20-70).
(5) Connect connector P921 to connector
J921.
Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals