Removal. - TM-9-2320-279-20-11079

TM 9-2320-279-20-1

Electrical System Maintenance Instructions (Cont)

Removal.

(1)

Open drain valve (1) and drain fuel from fuel--water separator (2).

(2)

Disconnect fuel restriction sensor wire (3) at sensor electrical plug (4).

(3)

Disconnect two hoses (5 and 6).

NOTE

Some vehicles have a nut, lockwasher, washer,

and screw. Others have a flanged nut and screw.

(4)

Remove nut (7), lockwasher (8), screw (9),

washer (10), clamp (11), and sensor (12).

(5)

Remove elbows (13 and 14).

Installation.

WARNING

Adhesives, solvents, and sealing com-

pounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing. To avoid injury or death,

keep away from open fire and use in

well--ventilated area. If adhesive, solvent,

or sealing compound gets on skin or

clothing, wash immediately with soap

and water.

(1) Coat threads of elbows (1 and 2) with

pipe thread sealing compound.

(2) Install elbows (1 and 2) in sensor (3).

NOTE

Some vehicles have a nut, lockwasher, washer, and screw. Others have a flanged nut and

screw.

(3)

Attach sensor (3) to vehicle with clamp (4), washer (5), screw (6), lockwasher (7), and nut (8).

(4)

Connect hoses (9 and 10) to sensor (3).

Change 4

7-375