 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-279-20-1
Electrical System Maintenance Instructions (Cont)
7-85. TRANSMISSION OIL TEMPERATURE SWITCH REMOVAL/INSTALLATION
(CONT).
a.
Removal.
NOTE
Some models of oil temperature switches
contain an insulation washer.
Remove nut (1), lockwasher (2),
(1)
wire (3), washer (4), and insulation
washer (4.1) (some models) from
transmission oil temperature switch (5).
Remove transmission oil temperature
(2)
switch (5) from transmission
housing (6).
b. Installation.
WARNING
Adhesives, solvents, and sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. To avoid injury or death,
keep away from open fire and use in
well-ventilated area. If adhesive, solvent,
or sealing compound gets on skin or
clothing, wash immediately with soap and
water.
Coat pipe threads of transmission oil
(1)
temperature switch (5) with pipe thread
sealing compound, and install in
transmission housing (6).
Install insulation washer (4.1) (some
(2)
models), washer (4), wire (3),
lockwasher (2), and nut (1) on
transmission oil temperature switch (5).
Do not tighten nut more than 20 lb-in
(2.26 Nm).
c.
Follow-on Maintenance.
Start engine and check for leaks (TM 9-2320-279-10).
(1)
Drive vehicle, check operation of transmission oil temperature switch (TM 9-2320-279-10).
(2)
Park vehicle (TM 9-2320-279-10).
(3)
END OF TASK
7-304 Change 3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals