 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-279-20-1
Electrical System Maintenance lnstructions (Cont)
7-70. DOMELIOHT ASSEMBLY REMOVAL/lNSTALLATlON (CONT).
a. Removal.
(1) Remove two screws (1) and lens (2) from
domelight housing (3).
(2) Remove lamp (4) from socket (5).
(3) Remove two screws (6) and bracket (7).
NOTE
Tag and mark wires before disconnecting.
(4) Disconnect domelight wire (8) at
connector (9).
(5) Remove nut (10) and disconnect ground
wire (11) from upper left screw (12).
(6) Remove four screws (12) and domelight
housing (3) from bracket (7).
b. Installation.
(1) Install four screws (12) and domelight
housing (3) to bracket (7).
(2) Connect ground wire (11) to upper left
screw (12) with nut (10).
(3) Connect domelight wire (8) at
connector (9).
(4) Install bracket (7) on cab with two
screws (6).
(5) Install lamp (4) in socket (5).
(6) Install lens (2) on domelight housing (3)
with two screws (1).
c. Follow-on Maintenance.
(1) Connect batteries (para 7-91).
(2) Check operation of domelight (TM 9-2320-279-10).
END OF TASK
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals