STEP, SIDE, AND REAR CLEARANCE, AND SIDE TURN LIGHT REMOVAL/INSTALLATION.

9-2320-279-20-1

Electrical System Maintenance Instructions (Cont)

7-65. STEP, SIDE, AND REAR CLEARANCE, AND SIDE TURN LIGHT

REMOVAL/INSTALLATION.

This task covers:

c. Follow-on Maintenance

a. Removal

b. Installation

INITIAL SETUP

References

Models

None

All

Equipment Condition

Test Equipment

None

TM or Para

Condition Description

Special Tools

TM 9-2320-279-10 Shut off engine.

TM 9-2320-279-10 Clearance light switch off.

None

Special Environmental Conditions

Supplies

None

General Safety Instructions

Personnel Required

None

MOS 63S, Heavy wheel vehicle mechanic

a. Removal.

NOTE

Lights are removed in a similar

manner. Step clearance light is

shown.

(1) Remove two screws (1).

(2) Remove lens (2).

(3) Remove lamp (3) from

lampholder (4).

b. Installation.

(1) Install lamp (3) in

lampholder (4).

(2) Install lens (2).

(3) Install two screws (1).

c. Follow-on Maintenance.

Check operation of step, side, and rear

clearance, and side turn lights

(TM 9-2320-279-10).

END OF TASK

7-229