COMPOSITE TAILLIGHT ASSEMBLY REMOVAL/INSTALLATION.

TM 9-2320-279-20-1

Electrical System Maintenance Instructions (Cont)

Installation.

(1)

Soldier A positions front

composite light (1) in cab (2)

while Soldier B installs two

screws (3), lockwashers (4), and

ground wire pigtail (4.1) (Model C only).

(2)

Connect three C washers (5) and

three wires (6) at connectors (7).

(3)

Install clamp (8) on three

wires (6) with screw (9),

washers (10), and nut (11).

Follow-on Maintenance.

(1)

Install brake treadle valve (if

removed) (para 11-10).

(2)

Connect batteries (para 7-91).

(3)

Check operation of front

composite light

(TM 9-2320-279-10).

END OF TASK

7-62.

COMPOSITE TAILLIGHT ASSEMBLY REMOVAL/INSTALLATION.

This task covers:

a. Removal (M977, M983, M984, M985)

d. Installation (M984E1)

b. Installation (M977, M983, M984, M985)

e. Follow-on Maintenance

c. Removal (M984E1)

INITIAL SETUP

Models

References

M977, M983, M984, M984E1, M985

None

Test Equipment

Equipment Condition

None

TM or Para

Condition Description

Special Tools

Para 7-91

Batteries disconnected.

None

Supplies

Special Environmental Conditions

Tags, identification, Item 48, Appendix C

None

Personnel Required

General Safety Instructions

MOS 63S, Heavy wheel vehicle mechanic

None

Change 5

7-219