Assembly-continued - TM-9-2320-279-20-10867

TM 9-2320-279-20-1

Electrical System Maintenance Instructions (Cont)

NOTE

Model A has a magnet and two pads on base.

Model B has a magnet only.

Do steps (13) thru (15) for Model A.

Do step (16) for Model B.

(13)

Install magnet (25) with screw (26).

WARNING

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,

and are harmful to skin and clothing. To avoid injury or death, keep away from open fire

and use in well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or

clothing, wash immediately with soap and water.

(14)

Apply adhesive to two pads (27) and install.

(15)

Install gasket (28) and dome (29) on light (11) with four screws (30).

(16)

Install dome (29) on light (11) with four screws (31).

7-198.3/(7-198.4 blank)

Change 3