Section VII. MISCELLANEOUS SWITCHES

9-2320-279-20-1

Electrical System Maintenance Instructions (Cont)

7-49. CONTROL JUNCTION BOX REMOVAL/INSTALLATION (M978) (CONT).

(19) Connect three connectors (43).

(20) Install three wires (44) on contact

button (38) with two screws (45).

NOTE

Replace plastic cable ties as necessary.

(21) Install two wires (23 and 25),

fuseholder (46), two lockwashers (47),

and nuts (48) on rotary switch (31).

(22) Install fuse (49) in fuseholder (46) and

connect.

c. Follow-on Maintenance.

(1) Install TLI TANK LEVEL INDICATOR

(para 7-87).

(2) Install SP SAMPLING PROBE valve

bracket (para 23-35).

(3) Connect batteries (para 7-91).

(4) Check operation of control functions

(TM 9-2320-279-10).

END OF TASK

MISCELLANEOUS

SWITCHES

Section VII.

7-50. TURN SIGNAL SWITCH REMOVAL/INSTALLATION.

This task covers:

c. Follow-on Maintenance

a. Removal

b. Installation

INITIAL SETUP

Personnel Required

Models

MOS 63S, Heavy wheel vehicle mechanic

All

References

Test Equipment

None

Equipment Condition

Special Tools

None

TM or Para

Condition Description

Supplies

Para 7-19

Instrument panel removed.

Connector, electrical, butt, Item 19,

Special Environmental Conditions

Appendix C

None

Tags, identification, Item 48, Appendix C

Ties, cable, plastic, Item 52, Appendix C

General Safety Instructions

None

7-166