 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-279-20-1
Electrical System Maintenance Instructions (Cont)
b. Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in
well-ventilated area. If adhesive,
solvent, or sealing compound gets
on skin or clothing, wash
immediately with soap and water.
(1) Coat threads of stoplight
switches (1 and 2) with pipe
thread sealing compound.
(2) Install stoplight switches (1
and 2) in brake treadle valve (3).
(3) Install four washers (4), nine
wires (5), and four nuts (6).
(4) Install light guard (7) with four
screws (8).
c. Follow-on Maintenance.
(2) Start engine and build up air pressure
(TM 9-2320-279-10).
(3) Check operation of stoplight switches
(TM 9-2320-279-10).
(4) Shut off engine (TM 9-2320-279-10).
END OF TASK
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals