ENGINE STOP SWITCH REMOVAL/INSTALLATION.

TM 9-2320-279-20-1

Electrical System Maintenance Instructions (Cont)

7-38. ENGINE STOP SWITCH REMOVAL/INSTALLATION.

This task covers:

c. Follow-on Maintenance

a. Removal

b. Installation

INITIAL SETUP

References

Models

None

All

Equipment Condition

Test Equipment

None

Condition Description

TM or Para

Batteries disconnected.

Para 7-91

Special Tools

None

Special Environmental Conditions

None

Supplies

Tags, identification, Item 48, Appendix C

General Safety Instructions

None

Personnel Required

MOS 63S, Heavy wheel vehicle mechanic

a. Removal.

(1) Remove nut (1) from

ENGINE STOP switch (2).

(2) Remove ENGINE STOP

switch (2) from bracket (3).

NOTE

Tag and mark wires before

disconnecting.

(3) Remove two screws (4) and

disconnect wires (5).

b. Installation.

(1) Connect two wires (5) to

ENGINE STOP switch (2)

with two screws (4).

(2) Install ENGINE STOP

switch (2) in bracket (3).

(3) Install nut (1) on ENGINE

STOP switch (2).

c. follow-on Maintenance.

(1) Connect batteries

(para 7-91).

(2) Start engine, check

operation of ENGINE STOP switch (TM 9-2320-279-10).

END OF TASK

7-113