|
|
TM 9-2320-279-20-1
Electrical System Maintenance Instructions (Cont)
a.
Removal.
NOTE
Both turn indicator lights are removed
and installed the same way.
(1)
Pull turn indicator light socket (1) out of
receptacle (2).
(2)
Remove bulb (3) from turn indicator light
socket (1).
(3)
Remove shield (4). Remove lens (5) from shield.
Remove force ring (6) from lens.
(4)
Remove nut (7), lockwashers (8), and receptacle
(2) from instrument panel (9).
NOTE
Some trucks do not have butt connectors.
(5)
Cut wire (10) at rear of electrical
butt connector (11) to remove turn
indicator light socket (1).
b.
Installation.
(1)
Install lockwasher (8) on receptacle (2) and
insert receptacle through instrument panel (9).
(2)
Install nut (7).
(3)
Install force ring (6) in lens (5). Install
lens in shield (4). Install shield.
(4)
Install bulb (3) into turn indicator light socket (1).
(5)
Install electrical butt connector (11) on wires (10).
(6)
Install turn indicator light socket (1) into receptacle (2).
c.
Follow-on Maintenance.
(2) Check operation of turn indicator light (TM 9-2320-279-10).
END OF TASK
Change 4
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |