|
|
TM 9-2320-279-20-1
Electrical System Maintenance Instructions (Cont)
7-27. TACHOMETER/HOURMETER REMOVAL/INSTALLATION.
This task covers:
c. Follow-on Maintenance
a. Removal
b. Installation
INITIAL SETUP
References
Models
None
All
Equipment Condition
Test Equipment
None
Condition Description
TM or Para
Instrument panel removed.
Special Tools
None
Special Environmental Conditions
None
Supplies
Tags, identification, Item 48, Appendix C
General Safety Instructions
None
Personnel Required
MOS 63S, Heavy wheel vehicle mechanic
a. Removal.
(1) Pull light socket (1) from
tachometer/hourmeter (2).
NOTE
Tag and mark wires before disconnecting.
(2) Loosen four screws (3) and disconnect four
wires (4) from terminal strip (5).
(3) Remove two nuts (6), lockwashers (7), and
wire (8).
(4) Remove bracket (9) and
tachometer/hourmeter (2) from instrument
panel (10).
b.
Installation.
bracket (9) on instrument panel (10).
nuts (6) on tachometer/hourmeter (2).
(3) Connect four wires (4) to terminal strip (5) on
tachometer/hourmeter (2). Tighten four
screws (3).
(4) Push light socket (1) in
tachometer/hourmeter (2).
c. Follow-on Maintenance.
(2) Start engine (TM 9-2320-279-10).
(4) Shut off engine (TM 9-2320-279-10).
END OF TASK
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |