Removal. - TM-9-2320-279-20-10751

TM 9-2320-279-20-1

Electrical System Maintenance Instructions (Cont)

Removal.

(1)

Pull light socket (1) from

ammeter (2).

NOTE

Tag and mark wires before

disconnecting.

Some trucks have two wires. Some

trucks have three.

(2)

Disconnect three wires (3) from

ammeter (2).

(3)

Remove two nuts (4),

lockwashers (5), and bracket (6).

(4)

Pull ammeter (2) from

instrument panel (7).

(5)

Remove two nuts (8),

lockwashers (9), and terminals

(10) from ammeter (2).

Installation.

(1) Install two terminals (10),

lockwashers (9), and nuts (8)

on ammeter (2).

(2) Install ammeter (2) and

bracket (6) on instrument

panel (7).

(3) Install two nuts (4) and

lockwashers (5) to secure

ammeter (2) and bracket (6)

on instrument panel (7).

(4) Connect three wires (3) to ammeter (2).

(5) Push light socket (1) in ammeter (2).

Follow-on Maintenance.

(1)

Install instrument panel (para 7-19).

(2)

Start engine and check operation of AMPERES gage (TM 9-2320-279-10).

(3)

Shut off engine (TM 9-2320-279-10).

END OF TASK

Change 4

7-91