OIL PRESSURE GAGE REMOVAL/INSTALLATION.

TM 9-2320-279-20-1

Electrical System Maintenance Instructions (Cont)

7-20. OIL PRESSURE GAGE REMOVAL/INSTALLATION.

This task covers:

c. Follow-on Maintenance

a. Removal

b. Installation

INITIAL SETUP

References

Models

None

All

Equipment Condition

Test Equipment

None

TM or Para

Condition Description

Special Tools

Para 7-19

Instrument panel removed.

None

Special Environmental Conditions

Supplies

None

Tags, identification, Item 48, Appendix C

General Safety Instructions

Personnel Required

None

MOS 63S, Heavy wheel vehicle mechanic

a. Removal.

(1) Pull light socket (1) from oil pressure

gage (2).

NOTE

Tag and mark wires before disconnecting.

(2) Disconnect three wires (3) from

terminals (4).

(3) Remove two nuts (5), lockwashers (6),

and bracket (7).

(4) Pull oil pressure gage (2) from

instrument panel (8).

(5) Remove three nuts (9), lockwashers (10),

and terminals (4) from oil pressure

gage (2).

b. Installation.

(1) Install three terminals (4),

lockwashers (10), and nuts (9) on oil

pressure gage (2).

(2) Install oil pressure gage (2) and

bracket (7) on instrument panel (8) with

two nuts (5), and lockwashers (6).

(3) Connect three wires (3) to oil pressure

gage (2).

(4) Push light socket (1) in oil pressure

gage (2).

c. Follow-on Maintenance.

(1) Install instrument panel (para 7-19).

(2) Start engine and check operation of oil pressure gage (TM 9-2320-279-10).

(3) Shut off engine (TM 9-2320-279-10).

END OF TASK

7-81