Cleaning/Inspection. - TM-9-2320-279-20-10563

TM 9-2320-279-20-1

Fuel System Maintenance Instructions (Cont)

(7)

Remove four screws (13), bowl ring (14), and bowl (10).

NOTE

Some models have a different bowl configuration that contains a plug. Do step (7.1) for

these models.

(7.1) Remove plug (27) from bowl (10).

(8) Remove gasket (15).

(9) Remove cylinder ring (16) and gasket (17) from cylinder (18).

(10) Remove centrifuge (19), baffle (20), ball (21), and gasket (22) from cylinder (18).

NOTE

There are two models of fuel-water separators. Model A has two screws in each bracket.

Model B has one screw in each bracket. Do step (11) for Model A and step (11.1) for Model B.

(11) Remove four nuts (23), washers (24), screws (25), and two brackets (26) from cylinder (18).

(11.1) Remove two nuts (23), washers (24), screws (25), and two brackets (26) from cylinder (18).

c. Cleaning/Inspection.

WARNING

Adhesives solvents, and sealing compounds can burn easily, can give off harmful vapors,

and are harmful to skin and clothing. To avoid injury or death, keep away from open fire

and use in well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or

clothing, wash immediately with soap and water.

(1)

Clean all metal parts in drycleaning solvent.

(2)

Check threaded parts for crossed or stripped threads. Replace all damaged parts.

(3)

Check all plastic parts for damage. Replace all damaged parts.

(4)

Check cylinder for damage. Replace cylinder if damaged.

4-37

Change 3