Disassembly. - TM-9-2320-279-20-10562

TM 9-2320-279-20-1

Fuel System Maintenance Instructions (Cont)

4-10. FUEL-WATER SEPARATOR REMOVAL/REPAIR/INSTALlATION (CONT).

b. Disassembly.

NOTE

There are two models of fuel-water separators. Model A uses two screws in each bracket.

Model B has one screw in each bracket.

(1)

Remove T-handle (1), preformed packing (2), lid (3), and preformed packing (4).

(2)

Remove filter element (5).

(3)

Remove drain valve (6) and gasket (7).

NOTE

There are two models of fuel-water separators. Model A uses a bowl with feedthrough

terminal connectors. Model B uses a feedthrough pigtail. Do step (4) for Model A and

steps (4.1) and (4.2) for Model B.

(4)

Remove two retainers (8) from heater terminals (9) and push heater terminals inside bowl (10).

(4.1)

Cut ring terminal (7.1) from ground wire (7.2).

(4.2)

Loosen heater pigtail retainer (7.3) and push pigtail (7.4) inside cylinder ring (16).

(5)

Remove heater assembly (11).

(6)

Remove return tube (12).

4-36

Change 3