FUEL-WATER SEPARATOR REMOVAL/REPAIR/INSTALLATION.

TM 9-2320-279-20-1

Fuel System Maintenance Instructions (Cont)

(1)

Open drain valve (1) and drain fuel-water separator (2).

Remove T-handle (3), preformed packing (4), lid (5), and preformed packing (6).

(2)

Remove filter element (7).

(3)

Install filter element (7).

(4)

Close drain valve (1).

(5)

Pour clean diesel fuel into body of fuel-water separator (2) until full.

(6)

Wet lid (5) and preformed packing (6) with fuel.

(7)

Install preformed packing (6), lid (5), preformed packing (4), and T-handle (3).

(8)

Follow-on Maintenance.

(1) Start engine (TM 9-2320-279-10).

(2) Check engine operation (TM 9-2320-279-10).

(3) Shut off engine (TM 9-2320-279-10).

END OF TASK

4-10.

FUEL-WATER

SEPARATOR

REMOVAL/REPAIR/iNSTALLATION.

This task covers:

d. Assembly

a. Removal

b. Disassembly

e. Installation

f. Follow-on Maintenance

c. Cleaning/Inspection

INITIAL SETUP

References

Models

None

All

Test Equipment

Equipment Condition

None

TM or Para

Condition Description

Special Tools

TM 9-2320-279-10 Shut off engine.

None

Special Environmental Conditions

Supplies

None

Solvent, dry cleaning, Item 47, Appendix C

General Safety Instructions

Compound, sealing, pipe thread, Item 18,

No smoking or flames.

Appendix C

Fire extinguisher within reach.

Tags, identification, Item 48, Appendix C

Oil, fuel, diesel, Item 27, Appendix C

Personnel Required

MOS 63S, Heavy wheel vehicle mechanic

4-33