Follow-on Maintenance. - TM-9-2320-279-20-10556

TM 9-2320-279-20-1

Fuel System Maintenance Instructions (Cont)

4-7. FUEL TANK AND BRACKETS REMOVAL/INSTALLATION (CONT).

(11.1) Coat threads of check valve (14) and elbow (12) with pipe thread sealing compound.

(12) Connect fuel supply line (19) to check valve (14).

(13) Connect fuel return line (20) to elbow (12).

NOTE

To ensure a good ground, clean area around cushion clip to expose bare metal before

attaching ground wire.

Some vehicles have a screw, lockwasher, washer, lockwasher, lockwasher and nut.

Others have a flanged screw and flanged nut.

(14) Install cushion clip (21) and ground wire (21.1) with screw (22) and locknut (27).

(14.1) Apply corrosion preventive compound to ground wire (21.1) and locknut (27).

NOTE

Use plastic cable ties as required to support hoses and wires behind fuel tank and under

chassis.

(15) Install air vent line (28) to vent valve (10).

d. Follow-on Maintenance.

(1) Install air reservoir No. 2 (if strap and bracket were removed) (para 11-30).

(2) Install fuel sending unit (para 7-80).

(3) Fill fuel tank (TM 9-2320-279-10).

(4) Check fuel tank and connections for leaks.

END OF TASK

4-30

Change 5