WINCH CABLE WILL NOT PAY OUT (M984E1)-continued

TM 9-2320-279 -20-

Troubleshooting Malfunctions (Cent)

(Cent)

2-9. Troubleshooting

Test or Inspection

Corrective Action

HEAVY-DUTY WINCH

1.1. WINCH CABLE WILL NOT PAY OUT

)

Step 5. Set fail-safe switch to ON position. Engage winch OUT. Check resistance between terminals

B and D.

If resistance is more than 15 ohms, replace remote controller.

Step 6. Disconnect connector from fail-safe valve on heavy-duty winch forward manual control,

Set all electrical switches for remote operation (TM 9-2320-279-10). Check resistance of

wire 854 from contact 2 on fail-safe valve connector to pin C at electrical control box.

If resistance is more than zero ohms, repair wire 854 or replace fail-safe valve

connector.

2-183