Table 2-9. Troubleshooting-continued

TM 9-2320-279-20-1

Troubleshooting Malfunctions (Cont)

Table 2-9. Troubleshooting (Cont)

Malfunction

Test or Inspection

Corrective Action

ENGINE

1. FAILS TO CRANK.

Step 1.

Check transmission range selector is in N (Neutral).

Move transmission range selector to N.

Check BATTERY gage reads 22-28 volts with ENGINE switch ON.

Step 2.

There are two types of batteries. Model A is identified by a 6TN printed on the side

of the battery, while Model B has a 6TL printed on the side of the battery.

Refer to the illustrations for Models A and B for proper positioning of the batteries.

The battery caps of Model B do not protrude through the bracket.

If Models A and B are combined on the same vehicle, all batteries will be positioned

as shown for Model B.

Tighten loose battery cable connections and clean corroded battery connections

(TM 9-6140-200-14).

Repair broken connections (FM 55-506-l).

Check voltage at batteries for 22-28 volts.

Step 3.

If voltage is below 22 volts, service batteries.

Change 3