Inspection of winch assembly.

TM 9-2320-211-34-2-3

(3) Inspection of winch assembly.

FRAME

NOTE

R e a d i n g s must be within limits given in table 17-3.

I f readings are not within given limits, throw away

part and get a new one.

C h e c k that two seals (1) are not cracked, burned, too stiff or damaged in

a n y other way.

C h e c k that bushing (2) and sleeve (3) are not scored, chipped or damaged

i n any other way.

M e a s u r e bushing (2) and sleeve (3). Check wear limits. Refer to

C h e c k that end frame (4) is not cracked and does not have damaged threads

o r other damage.

C h e c k that thrust washers (5 and 6) are not cracked, worn, broken or

d a m a g e d in any other way.

C h e c k that shaft (7) is not cracked or scored.

M e a s u r e shaft (7) . Check wear limits. Refer to table 17-3.

C h e c k that winch cable and chain and hook assembly has no broken or

f r a y e d strands or other damage.

GO TO FRAME 2

17-145