Inspection. - TM-9-2320-211-34-2-30087

TM 9-2320-211-34-2-3

Inspection.

FRAME 1

NOTE

Readings must be within limits given in table 17-1. If read-

ings are not within given limits, throw away part and get a

new one.

Check that seals (1 and 2) are not cracked, burnt, too stiff or damaged in any other

way.

Check that three bushings (3) are not scored, chipped or damaged in any other way.

M e a s u r e outer diameter of three bushings.

Check that thrust rings (4 and 5), sliding clutch (6), and shifter fork yoke (7) are not

worn, broken or damaged in any other way.

Check that poppet (8) is not bent or broken.

Check that frame (9) is not cracked or damaged in any other way, and that it does not

have damaged threads.

Check that drag brake brakeshoe assembly (10) is not worn or oil soaked.

Check that winch cable and chain assembly has no frayed strands or other damage.

GO TO FRAME 2

Table 17-1. Cable Drum Bushing and End Frame Bushing Wear Limits

Wear Limit

Index

I t e m / P o i n t of Measurement

(inches)

Number

2.127 to 2.145

C a b l e drum bushing outer diameter

2.127 to 2.145

End frame bushing outer diameter

17-71