Cleaning, Inspection, and Repair. - TM-9-2320-211-34-2-20218

TM 9-2320-211-34-2-2

c . Cleaning, Inspection, and Repair.

WARNING

Dry cleaning solvent is flammable. Do not use

n e a r an open flame. K e e p a fire extinguisher

n e a r b y when solvent is used. Use only in well-

v e n t i l a t e d p l a c e s . Failure to do this may result

i n injury to personnel and damage to equipment.

C l e a n bracket with solvent, and air dry.

(1)

Cleaning.

(2) Inspection and Repair.

( a ) Check that bracket is not damaged, bent or cracked. If bracket

i s damaged, get new bracket or repair by welding or straightening as needed.

(b) Check that bumper is not cracked or damaged. If bumper is

damaged, get new bumper.

Replacement.

FRAME 1

L i n e up holes and put in two screws (2).

P u t bracket (1) in place.

P u t on two nuts (3).

P u t bumper (4) in place. Put on two nuts (5).

NOTE

Follow-on Maintenance Action Required:

R e p l a c e wheels near bumper mounting bracket.

R e f e r to TM 9-2320-211-10.

END OF TASK