Inspection and Repair. - TM-9-2320-211-34-2-10664

TM 9-2320-211-34-2-1

d. Inspection and Repair.

FRAME 1

CAUTION

If pins (1) are drilled out, be careful not to use a bit larger

than pin. Damage to hole for pin in axle housing will result.

If pins (1) are damaged, drill them out

Check that three pins (1) are not damaged.

and put in new ones.

Check that plug (2), plug (3), 18 studs (4), and relief valve (5) are not damaged. If

they are damaged, throw them away and get new ones.

CAUTION

If rivets (6) are damaged and must be drilled out, be careful

not to use a bit larger than rivet hole in backing plate (7).

Damage to holes in backing plate will result.

Check that rivets (6) in backing plate (7) are not loose or cracked. Drill out loose

or cracked rivets and put in new ones.

Check that axle housing (8) has no scratches or burrs on machined surfaces. Fix

burrs or scratches with a fine mill file.

END OF TASK