FRAME 2 - TM-9-2320-211-34-2-10584

TM 9-2320-211-34-2-1

FRAME

C h e c k that two bearing cups (1) and two bearing cones (2) are not damaged.

R e f e r to para 7-7. R e p l a c e if damaged.

M o u n t each differential case half (3) in a lathe. Place dial indicator against

f l a n g e that mounts to helical drive gear (4). C h e c k that runout at flange of

d i f f e r e n t i a l case half is not more than 0.002 inch.

WARNING

Dry cleaning solvent is flammable. Do not use near an

o p e n flame. K e e p a fire extinguisher nearby when sol-

v e n t i s u s e d . U s e only in well-ventilated places.

Failure to do this may result in injury to personnel and

d a m a g e to equipment.

I f differential case half (3) runout is more than 0.002 inch, use lathe to cut

a w a y only enough metal to bring runout within limits. Rem-eve burrs with

a honing stone. C l e a n with solvent.

GO TO FRAME 3

NOTE: CHECK ONLY THOSE PARTS WHICH ARE CALLED OUT.

PARTS WITHOUT CALLOUTS ARE SHOWN ONLY FOR

REFERENCE PURPOSES.

9-32