Input shaft. - TM-9-2320-211-34-2-10482

TM 9-2320-211-34-2-1

(2) Input shaft.

FRAME 1

C h e c k that machined surface on shaft (1) is not scratched, scored or pitted

If shaft is damaged, get a new one.

C h e c k that splines on shaft (1) are not bent or chipped. If splines are

damaged, get a new shaft.

Check that synchronizer (2) slides smoothly on shaft (1). Check that

t e e t h on synchronizer are not cracked or broken. If synchronizer is dam-

aged, get a new one.

Check that five bearings (3) are not damaged. Refer to TM 9-214.

Check that two bushings (4) are not worn, scored or burred. If bushings

are damaged, get new ones.

Check that teeth on two gears (5) are not cracked, chipped or broken. If

teeth are damaged, get new gears.

Check that two collars (6) and lockring (7) are not worn, cracked or

bent. If parts are damaged, get new ones.

GO TO FRAME 2

8-52