FRAME 3 - TM-9-2320-211-34-2-10460

TM 9-2320-211-34-2-1

FRAME 3

NOTE

Readings must be within limits given in table 8-2. If

r e a d i n g s are not within given limits, throw away both

g e a r s and get new ones.

M e a s u r e backlash between high speed intermediate gear (1) and rear driven

gear (2).

M e a s u r e backlash between front output driven gear (3) and front intermediate

drive gear (4).

Measure backlash between front output driven gear (3) and sprag clutch

shifter collar (5).

M e a s u r e backlash between sprag clutch shifter collar (5) and sprag clutch

outer race (6).

END OF TASK

T a b l e 8-2. Transmission Transfer High Speed Gear Backlash Wear Limits

Size and Fit

of New Parts

Wear Limit

I n d e x Number

Item /Point of Measurement

(inches)

1 and 2

H i g h speed intermediate gear

0.005 to 0.010

None

t o rear driven gear

3 and 4

F r o n t output driven gear to

0.005 to 0.010

None

f r o n t intermediate drive gear

3 and 5

F r o n t output driven gear to

0.017

None

s p r a g clutch shifter collar

5 and 6

S p r a g clutch shifter collar to

0.017

None

s p r a g clutch outer race