|
|
TM 9-2320-211-34-2-1
FRAME 5
1.
Put plug (1) into sleeve (2).
2.
Put a small amount of grease into bore of sleeve (2).
3.
Slide sleeve (2) onto input shaft (3) and aline it with clutch release yoke
(4).
4.
Put two pads (5) and spring clips (6) in place on sleeve (2) and clutch
release yoke (4).
5.
Put in four screws (7) and lockwashers (8).
6.
W i t h clean rag, wipe grease from clutch housing (9).
NOTE
Follow-on Maintenance Action Required:
1.
Replace transmission. Refer to para 7-3.
2.
Fill transmission. Refer to LO 9-2320-211-12.
END OF TASK
7-119
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |