|
|
TM 9-2320-211-34-2-1
Replacement.
g.
( 1 ) Oil cooler housing
P l a c e new gasket (1) on engine, lining up all bolt holes in the gasket with
1.
t h e threaded bolt holes in the engine.
2.
P l a c e housing (2) over gasket (1), lining up holes for 16 bolts (3) with bolt
h o l e s in gasket (1) and bolt holes in engine.
P u t in 16 machine bolts (3) with washers (4). Put in one machine bolt (5)
3.
with washer (6).
4.
Slide water inlet hose (7) forward over flange (8). Tighten hose clamps (9).
END OF TASK
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |