|
|
TM 9-2320-211-34-2-1
Cleaning, Inspection, and Repair.
c.
WARNING
D r y cleaning solvent is flammable. Do not use
near an open flame. K e e p a fire extinguisher
n e a r b y at all times when using solvent. Use
o n l y in wellventilated places. Failure to do
t h i s may result in injury to personnel and dam-
a g e to equipment.
FRAME 1
C l e a n both gears in dry cleaning solvent.
1.
C h e c k gear teeth for burrs and pits. Polish small burrs and pits with
2.
c r o c u s cloth. G e t new gear, if damage will not rub out.
C h e c k keyways in gears for raised metal or burrs. Polish off with a fine mill
3.
file.
M e a s u r e inside diameter of gear (1) and outside diameter of camshaft (2).
4.
C h e c k with table 2-1.
M e a s u r e inside diameter of gear (3) and outside diameter of crankshaft (4).
5.
C h e c k with table 2-1.
Check that plate (5) is not loose, cracked, or scored. Tighten if loose.
6.
G e t new plate, if scored or cracked.
END OF TASK
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |