Replacement. - TM-9-2320-211-34-2-10068

TM 9-2320-211-34-2-1

Replacement.

FRAME 1

Make an oil seal installation adapter.

S e e figure 2-1 for fabrication instructions

P u t oil seal installation adapter (1) on oil seal replacer (2).

NOTE

The crankshaft front seal has a double lip which

m u s t be put in timing case cover with flanged

e d g e away from cover mounting flange.

S p r e a d lubricating oil on new oil seal (3).

Put new oil seal on oil seal replacer (2).

P u t oil seal replacer (2), oil seal (3) and adapter (1) on crankshaft (4).

T u r n screw until adapter (1) mates with

P u t on screw (5) with washer (6).

t i m i n g case cover (7).

T i g h t e n screw (5), until oil seal (3) is seated flush in timing case cover (7).

T a k e out screw (5) with washer (6), oil seal replacer (2) and oil seal installation

adapter (1).

NOTE

F o l l o w - o n Maintenance Action Required:

R e p l a c e damper and pulley assembly. Refer to para 2-9.

END OF TASK