Assembly. - TM-9-2320-211-20-3-20741

TM 9-2320-211-20-3-2

Assembly.

(1) Seat assembly.

FRAME 1

NOTE

The top part of boards (1 and 6) has clearance around

the screw holes to sink the screw head. The bottom

part of boards does not have clearance around the screw

holes.

Find top part of outside board (1). Put five screws (2) through holes in

outside board so screw heads are on top side. Put channels (3) onto screws

with holes (4) to outside board.

Using socket wrench, screw on and tighten nuts (5) onto five screws (2). If

screws do not come through enough to screw on nuts, using mallet, hammer

screws in.

Find top part of outside board (6). Put five screws (7) through holes in

outside board so screw heads are on top side. Put screws through screw holes

in channels (3).

Put hook hinges (8) onto four rear screws (7) with hook part of hinge to top

of outside board (6).

Using wrench, screw on and tighten nuts (9) onto screws (7). If screws do

not come through enough to screw on nuts, using mallet, hammer screws in.

TO FRAME 2