Inspection and Repair. - TM-9-2320-211-20-3-20511

TM 9-2320-211-20-3-2

Inspection and Repair.

(1) Check all metal parts. Throw away any bent, broken or damaged parts.

Get new parts in their place.

(2) Check all wooden parts. Throw away any cracked, splintered or warped

parts. Get new parts in their place.

d. Assembly.

FRAME 1

Push bow top (1) into bow corner (2) and aline holes. Using screwdriver,

screw in and tighten two screws (3).

Push bow stake (4) into bow corner (2) and aline holes. Using screwdriver,

screw in and tighten two screws (5).

Put strap (6) against bow corner (2) as shown, aline holes, and hold it in

place. Using screwdriver, screw in and tighten screw (7).

Do steps 1 through 3 again on other side of bow top (1).

NOTE

Follow-on Maintenance Action Required:

Put bow assembly on truck. Refer to TM 9-2320-211-10.

END OF TASK