LIFT CYLINDER PACKING ASSEMBLY ADJUSTMENT (TRUCK M543A2).

TM 9-2320-211-20-3-2

NOTE

This task is the same for the two lift cylinders.

TOOLS: Spanner wrench, pn 11602326

SUPPLIES: None

PERSONNEL: One

EQUIPMENT CONDITION: Truck parked, engine off, handbrake set.

FRAME 1

Using spanner wrench (1), tighten packing nut (2) just a little by turning it

to right.

2. Raise and lower boom (3). Refer to TM 9-2320-211-10. Check for oil leaks.

3. If oil is still leaking, tighten nut (2) a little more and raise and lower boom (3)

again. Check for oil leak.

4. If nut (2) becomes tight and oil leak does not stop, tell direct support main-

tenance.

END OF TASK